Skypod Roof Lantern Measuring Guide
How to measure for your new Skypod roof lantern
When installed the Skypod Roof Lantern will be fitted to a timber upstand. The upstand is a raised kerb that prevents the glazed unit from touching the surface of the roof. The dimensions of the Skypod should match the measurements of the external edge of the timber upstand, as shown in the diagram below.
The minimum upstand for a Skypod roof lantern is 75mm.
If you have any questions at this stage, please consult a professional or give us a call.
If you are unsure about how to take the precise measurements required or if you have any questions, our team are here to help. However, please note that we cannot be held responsible for any inaccuracies in the measurements, so we highly recommend consulting a professional before ordering.
Please keep in mind that these measuring guides are provided in good faith and that Premier Doors Direct does not accept any liability for errors that may occur during the measuring and ordering process.
